The Conform Dual Static Monitor Arm is designed to provide side-by-side support for two monitors, in a compact footprint. As part of the Conform family it uses the Workrite pin assembly system, allowing it to be quickly mounted to a variety of bases and reconfigured with additional Conform monitor arms to adapt to your changing needs. Easily create a quadruple monitor system by using a 28" pole mount and two Conform Dual Static Monitor Arms. The Conform Dual Static Monitor Arm has been engineered to support over 15,000 cycles and exceeds ANSI/BIFMA x5.5 requirements. TAA Compliant.
For more than 25 years, Workrite Ergonomics has been helping organizations create happier, healthier and more productive workplaces. We take issues like neck and back pain, blurred vision, and headaches caused by extended computer use seriously, and are committed to helping organizations fight these increasingly common problems.
Since creating our first elevated monitor solution two decades ago, the market and Workrite have changed, a lot. What hasn’t changed is our passion for developing the best ergonomic solutions possible and our keen focus on listening to the industry. Every Workrite product is designed with the direct input of the ergonomics community to ensure they not only perform complex functions but are also intuitively simple to use.
We took a ground up approach to developing the Conform Series, which resulted in the most ergonomic, flexible, and easy to install system that we’ve ever created. The Conform Series features a variety of articulating and static arms, mounts, and accessories, making it an extremely versatile product that can accommodate virtually any design application or monitor configuration.
Articulating Arm options feature a pneumatic strut coupled with a vertical linkage system, allowing users to easily position monitors weighing up to 40 lbs with one hand. Static Arms provide a range of up to 2 feet of reach over the work surface and can be easily configured in arrays from 1 to 6 monitors.
The core of the Conform Series is the pin connection system, which enables arms to be inter changed and attached to a variety of base options and accessories. This allows a single desk mounted monitor system to easily become a dual arm system, or a desk mounted system to become a toolbar mounted system, or a wall mounted system to become a pole mounted system. As your needs change, Conform can easily change with you.
Conform Articulating Arms are available with pneumatic struts that easily lift monitors weighing up to forty pounds with one hand, providing users with smooth one-touch adjustability. Precision bushings coupled with a vertical linkage system allow arms to effortlessly float back and forth as users reposition their monitors to their desired focal distance and angle.
These arms are designed for fast and easy installation, and are pre-assembled, ready to slip on to your selected base option with ease. Utilizing the interchangeable pin connection system, Articulating Arms can be used with Conform Static arms, accessories, and a variety of base options. Reconfigure the Conform as hardware and office personnel needs change.
Designed for mounting multiple monitors in shallow work environments, Conform Static Arms may be used to display up to 24" wide monitors in side-by-side configurations and stacked arrangements from two to six monitors. The static height design maintains monitor alignment for a consistent appearance.
Like the rest of the Conform series, the pin connection system allows a multiple monitor arrangement to be converted into an extended single arm solution for use with a touch screen monitor, laptop or keyboard application, should business needs change in the future.
Silver and Black
Two monitors 0-16 lbs each
Maximum Monitor Height
(Video) Conform Monitor Arm Series
0" (static arm)
4.5" with 24" wide monitor
(Video) Legionella webinar 4 November 2020
Standard VESA (75 mm & 100 mm)
Rigid support, for two monitors up to 16 lbs
Compact mount with only 4.5" deep footprint (When used with 24" wide monitors), for shallow workspaces
Easily route and conceal cables through the integrated wire managers
Discrete silver color blends into office environments
Designed for fast and easy installation
Workrite MON-LTH2-ADJ-S Universal Laptop Holder $105.00 $63.00 Conform Dual Arm Adaptor - Workrite CONF-ADPT-DA $55.00 $33.00 Workrite CONF-ADPT-SPM Single Pole Mount Adaptor $76.00 $45.60 Workrite CONF-ADPT-DPM Dual Pole Mount Adaptor $88.00 $52.80 HD Metal Quick Release Adaptor - Workrite MON-ADPT-QR-B $68.00 $40.80 Workrite CONF-ACC-1EXT-S Flat, Static Extension Arm $74.00 $44.40
|Color||Silver and Black|
|Weight Capacity||0-16 lbs each|
|Monitor Height||Pole dependent|
|Articulation Range||0" (static arm)|
|Forward Reach||4.5" with 24" wide monitor|
|Mounting Pattern||Standard VESA 75 mm & 100 mm|
|Number of Monitors||2 Monitors|
|Maximum Monitor Size||24"|
Review this product
Dual Monitor Arm, The Best I've Seen, Sep 06, 2017
by Charles H, Avalon, New Jersey
I work doing IT for the County Gov't and routinely have dual monitors to set up at desks and workstations. Various brands have been used. My side gig is doing Marine electronics which I have done for years. I needed to set up a dual monitor arrangement in the wheelhouse of a 125' ft boat. After much research I settled for the Ergo Dual Monitor Arm since I needed an arm that could be set and locked in place. Since boats move any of the previous units I had worked with would be unworkable. The fit and finish was excellent and I was able to tighten the bolts to lock it down. Captain Howard was very pleased with the final installation.
0 of 0 voted this review as helpful Was this review helpful to you?
- Monitor Mount Comparison Guide
- Monitor Mount Application Considerations
- Product Sheet Workrite CONF-2SDS-WOPB-S
- Brochure Workrite CONF-2SDS-WOPB-S
- Installation Instructions Workrite CONF-2SDS-WOPB-S
- Conform GREENGUARD Gold Certificate
Workrite warrants to the original purchaser that the products it manufactures are free from defects in design, material and workmanship. Subject to the limitations below, Workrite warrants each product in this catalog to be free from defects in materials and workmanship for the life of the product in its original installation. With prompt written notice, Workrite will repair or replace, free of charge, any product, part or component which fails under normal use as a result of such defect.
Sierra HX Height Adjustable Workcenter components - Limited Lifetime
Electric components, motors, frames, brackets and feet.
All of the following exceptions to the limited lifetime warranty apply:
Fundamentals Electric Height Adjustable Workcenter components - 10 years
Electric components, motors, frames, brackets and feet
Essentia Height Adjustable Workcenter components - 5 years
Electric components, motors, frames, brackets and feet
Laminated worksurfaces and modesty panels - 5 years
Sierra HXL Crank Height Adjustable Workcenter components - 5 years
Including crank mechanisms
Cascade Height Adjustable Workcenter components - 5 years
Including counter-balance mechanisms
Line of Sight electrical components and manual lifts - 5 years
Line of Sight frames and metal desk parts - 5 years
Monitor supports and mounts - 10 years
Solace Clamp-on sit-stand products - 5 years
Solace Desktop sit-stand products - 2 years
LED and florescent lighting fixtures - 5 years
Lighting transformers and fluorescent ballasts - 1 year
Tranquility Wool & PET Felt panels and mounts - 5 years
Tranquility Poly Panels - 2 years
Fabrics, modesty panels, custom products and special order items - 2 years
Mousing surfaces and Slide Guide - 1 year
Having a dual monitor arm makes life easier by allowing users to choose the placement and orientation of their screens. Most dual monitor arms have a wide range of movement, so users can adjust their monitors' tilt, swivel, and rotation.
The arms of the Dual-Monitor Arm 180 Degree only adjust laterally using a tool included with your product. Find the small hex bolt on the swivel arm bracket. Use the small M3 Allen Wrench and turn counter-clockwise to loosen the swing tension in the arms. Move the arms backward or forward into the preferred position.
Adjusting Your Monitor Arm - YouTube
Two single arms will always be more stable than a dual-arm set up and you have the freedom to position them anywhere you want on your desk since they are not attached.